Summary

This is an angled stand for an Aeotec Multisensor 6

It raises it up a bit and angles 10 degrees downward

I've noticed that if placed on a high shelf the sensor won't detect motion down low, also if it isn't on the very edge of the shelf it gets worse as the field of view of the motion sensor is blocked

The mount that comes with the thing is straight garbage if not mounting to a wall imo and doesn't address this issue

This little stand raises it up and angles down to detect the entire room

I've included the fusion 360 design files (as everybody SHOULD....) so that if you want to modify the design to fit your needs it is as simple as doing push pull or extrude on whatever planes you want

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>5 percent</p></div></p>                                                    <strong>Filament:</strong> Prusament PLA                Galaxy Black

Modellquelle

Original-Link: Details anzeigen

CC BY

Summary

Print Settings

Tags

Modellquelle

Ähnliche Empfehlungen