A display mount to place your display on your PSU.

I left ample room for the PSU fan.

I have added the previous design versions to tinker with.

• v1 is the simplest design, without the arced walls
• v3 has a scaling factor calculation, because the first two designs, although designed with the supplier given dimensions fitted to tight for my taste.

;-) The very nice PSU feet can be admirred in
https://www.thingiverse.com/thing:3308712

Prusa

Prusa Mk2

No

Yes

0.4mm Nozzle, 0.2mm Layer Height

20% Triangle, and 5 layers wall, top and bottom.

Rotate the STL -135 degrees on the Y-axis to print on the front side.

v1 and v2 will give a non-manifold error. I don't know the cause.
Slicing and printing won't give a problem. Or repair it if you choose to do so.