I remixed the mount to work with the Snapmaker 2.0 A350T and flexible goose neck. I designed this to work with the Smatree Flexible Jaws Flex Clamp Mount Gooseneck Extension Compatible for Logitech Webcam C925e/C922x/C922/C930e/C930/C920x, NexiGo N60/Hello Cam,GoPro Hero 12/11/10/9/8/7/6/Arlo Ultra/Pro/Pro 2/Pro 3 available on Amazon. A fit for 1/4" Threaded cameras. When installing the goose neck into the holder you may need to use some sandpaper and take your time fitting it. You have the option to install in on the left or right side of the Snapmaker linear module Y axis and point the goose neck left, straight or right. Download: Left_StraightRight(Base, Arm and Holder)_v1.stl

To disassemble the goose neck you will need to take the bolt out on the clip. On the bottom you will see a philips screw. Remove and save that screw as you will reuse it with the holder.

I also remixed the Pi Camera Mount to be 180 degree and fit the Snapmaker 2.0 A350T. The mount should be compatible with arms and mounts in another remix (not uploaded here). Download: 180_Degree_Base_Remix_Compatible_v1.stl.

Snapmaker

Snapmaker 2 A350

0.16 mm

25%

You will need
4 x m4x8mm hex socket head cap bolts to attach the base to the Snapmaker.
1 x m4x20mm hex socket head cap bolt and nut to secure the arm to the base.
1 x #4 screw x .5 inches to secure the holder to the arm.
1 x goose neck in description above
1 x screw reused from goose neck