Table rizer 30*30mm
melissa_torres
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-01-05 04:56:40
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Had a side table wich was to low to the ground. So I made a riser wich screws into the table legs.
Fits a 30mm*30mm leg.
Used a rounded head woodscrew, size is 3,5*25mm.
Printsettings I used:
- PLA
- 3walls, 3 bottom/toplayers
- 25% infill
- no supports
Modellquelle
Original-Link: Details anzeigen
CC-BY