Summary

Simple curing station for my Elegoo Mars. It's my first try with Fusion 360.
The pot has a 100x100mm recess on the bottom for the typical cheap solar turntables (the UV LED will power the solar turntable).
The spiral fits a 5m UV LED strip and has a hole at the bottom for the plug.

UV-LEDs:
https://www.amazon.de/Onforu-Schwarzlicht-Lichtband-Selbstklebend-Dekorationsbeleuchtung/dp/B07D76XS94/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=uv+led+streifen+5m&qid=1636910103&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMjcyVDNQWEZBRDZUJmVuY3J5cHRlZElkPUEwMTEwNzU0M0JYMlE5VDNSVEw3SCZlbmNyeXB0ZWRBZElkPUEwMDM0MDA1MlVURlZUWTVJMFY2VyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

solar turntable:
https://www.amazon.de/Drehteller-Drehscheibe-Vitrine-Leistungsstark-Pr%C3%A4sentation/dp/B01J3ZXBOE/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=solar+drehteller&qid=1636909912&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyRUpKWk9PQjExV0RMJmVuY3J5cHRlZElkPUEwODEwMjU3M0ZPWURNNU1KWFQ2NiZlbmNyeXB0ZWRBZElkPUEwMzA5ODUxMlFJNFZaV0tXUVE0MyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I printed it with cheap PLA (too) fast and rough on my Sapphire plus with 0.8mm nozzle.
Even it's too rough I use it anyway (don't want to throw away 300g PLA).
I prefer to use a 0.6mm nozzle and 0.5mm layer hight.

Tip: with some contact glue (Pattex) on the spiral notch, the adhesive LED strips are mounted very strong.
inner diameter: ca. 15cm, height: ca. 20cm (15cm +5 for the turntable)