The original single screw tensioner for the pleated blinds in my camper broke, so I needed a new one. Didn't like the single screw design (and didn't want to pay for them), so I modeled this up in Tinkercad.

Parts needed per tensioner:

• 1x set printed parts
• 1x M3 16mm socket head cap screw
• 1x m3 hex bolt
• 2x #4 screws to affix to the wall. Length will vary, I used 1/2" in the camper.

ANET A8

Doesn't Matter

No

.1

50%

Might want to put a drop of glue on the M3 nut to secure it in place.