There are a large number of tiny SMD components welded to the back of the Raspberry Pi 5 circuit board. This baseboard can provide effective protection for the Pi 5 when you convert it into a convertible. In addition, this baseboard is also suitable for the older Pi "B" series models.

The specifications of the four screws are M2.5 × 8 mm. The hole diameter on the baseplate, which is nominally 2.4 mm, is just enough for the screws to self-tap the threads. Since there are precision components around, please be careful not to slip the screwdriver and do not over-tighten the screws.