Summary

Introducing a new V5 Smart Field Controller Case for Vex Robotics. This case was inspired by the original match controller case by Bracket Bender (https://www.thingiverse.com/thing:2561511). Some images are attached in the downloads!

There are numerous files for different configurations:

Base:

• The small base is the most compact version.
• The large base allows for a sticker or design to be modeled into the gap.

Top:

• The top with the hole requires the least amount of material and would be good for a field controller setup with a V5 Brain.
• The top without a hole (solid) can be used as a replacement. Could be used for sticker as well.
• The top without a hole (Full solid) cannot be used to mount a brain. A good cover for a sticker or design to be modeled on.

Name Plate:

• Example nameplate with a number is included. Any print would have a color change after X layers.
• Nameplate without a number is also attached.

Hardware required:

• 8/32" x 1/2" screws (roughly) for mounting the top to the base and V5 Brain to the Top
• 8/32" x 1/4" screws (roughly) for mounting the name plate to the base
• M2.5 x 8mm screws for mounting the raspberry pi to the base

Assembly:

• Mount the raspberry pi to the base using the M2.5 screws
• Mount the V5 Brain to the top using 8/32" screws
• (optional) Mount the nameplate to the base using 8/32" screws
• Slide the top into the base from the size and mount using 8/32 screws