v2 is a complete redesign of v1, of which i can't upload any changes anymore due to it being a remix.
v2 is flatter, stronger and running even smoother.

Everything is dependent on D1 in sketch1, changing it scales the size of the clip but not the clearances.
For example the length is D1x30, so 150mm long with it being 5mm.

Best printed in
- Prusament PETG
- 0.15mm layer height (for two layers clearance of the bridges)
- supports 0° overhang, on build plate only (with the Prusa XL i print it in PETG with PLA supports for even better results, e.g. no sticking of the two components in the clearances)
- 15-20% infill cubic
- also prints nicely in Prusament ASA