Adjustable foot pads that can be screwed on and off

Want to raise the height of your desk or simply need to level it? Why not try this screw-adjustable height-adjustable foot pad?

The size of the foot pads is 50×50 mm, and the minimum height of the table can be increased by 43 mm, while the maximum height can be adjusted to about 62 mm. It is not only suitable for raising the tabletop, but also can effectively help you easily adjust the level of the tabletop. Each foot pad can be fixed to the bottom of the table leg with up to 4 screws.

I specially designed two different styles of adjustable screws: one with a completely round base, and the other with a groove at the bottom, which makes it easier to hold when adjusting.

Each table needs to print 4 sets of accessories, each set including a foot pad base and a foot pad screw.

Printing Guide:

The tolerance between the base and the screw is rather tight. If it is found that the assembly is too tight, the size ratio of the screw in the X and Y directions can be appropriately reduced.