To install this modification, you need to purchase a 15×20 mm cable chain with 28 links, along with two end fittings.

The bottom end needs to be inserted into the aluminum profile in Keelung; the top is fixed to the profile equipped with a stepper motor for the extruder by two M3×30 mm screws. To ensure that the cable chain is firmly in place, you also need to prepare an additional four M4×15 mm screws.

These chain links do not require a support structure during printing.

This modification part is part of the "Comprehensive Modification" series. You can find the LCD modification parts and consumables shelf modification parts in "My Works".