Cases for the ErgoDonk Zero keyboard.  

Tested with PCB v0.2.

Should only be used with MX switches. 

Right and Left hand cases are unique and not interchangeable. 

The keyplate stl is designed for the left hand, and for the right hand should be mirrored before printing.

You can add print helper objects to keep the edges from curling. There is a ‘sacrificial’ support below the bridge that connects the island in the middle of the thumb cluster. Snap that off by hand. (It's highlighted in the image with the yellow arrow).

Use 8mm screws if the backplate is used. If no back plate is used, go with 4mm screws.