This is a redesign of the Dremel stand foot based on SSD. The main changes are that the model is designed with two separate parts. You can insert an M3 hexagonal head screw from the top, and a space is reserved at the bottom for embedding an M3 nut to fix the screw. In this way, you can adjust and tighten the stand foot as you wish, and at the same time, you can install and position it at a more suitable angle according to the needs of the workpiece.

It is recommended to use square nuts for better results, but if you don't over-tighten them on purpose, hexagonal nuts can also do the job adequately.

When using this design, please do so at your own risk - remember that Dremel is a power tool, and you must respect its powerful power. I used PLA to print this bracket, but from a safety perspective, you might want to choose a plastic with higher strength and better resilience

I have updated the STL model and added a "wing-like structure", which makes it easier to adjust the bracket on the workbench. At present, this is still an improvement plan in the experimental stage. Here is the Tinkercad link of the model:https://tinkercad.com/things/4s6Kw0mh3nJ