Project: goku.hfp
It is printed with a filling density of 100% and a layer height of 0.08 mm, and the thickness of the bottom layer is 0.16 mm

The model size is 137.26×200mm
When the layer thickness is less than 0.48mm at the bottom layer, you can appropriately increase the layer height for printing
The maximum allowable thickness is 2.24mm, and the actual thickness is also 2.24mm.

Consumables used:
#000000 PETG Pro, Elegoo black, transmission distance: 0.8
#75787b PETG Pro, Elegoo Silver, Transmission Distance: 0.3
#9ea2a2 PETG Pro, Elegoo grey, transmission distance: 3
#ffffff PETG Pro, Elegoo white, transmission distance: 3.5
A total of four different types of consumables were used in this printing process

Material replacement instructions:
Initially, use black consumables
Switch to silver filament on the 9th layer
Switch to gray consumables at the 12th layer
After the 18th layer