This is a support for the rumble motors I attached to my Logitech G920 pedals (works also with G25, G27 and G29). I took some inspiration from the design by Cal95ppe, but added some major modifications.

You will also need need this hardware:

· One (or two, for a tighter fix) M4 x 8mm per motor you install (throttle, brake, clutch).
· One M4 washer is reccomended, between the support and the pedal arm.
· One M2 x 8mm per motor you install.
· One M2 washer and 1 M2 nut.

You can follow this tutorial to get the rumbles working, via Simhub:

https://www.youtube.com/watch?v=8aLqqcEaUVk

This support is designed specifically for this rumbles, which have a 24mm outer diameter:

https://es.aliexpress.com/item/32893469218.html

NOT SUITABLE FOR THE STANDARD XBOX CONTROLLER ONES commonly used for this purpose. I prefer the ones I chose because they all have the same rumble intensity.