Dock Mount for Dell WD15
Ebon Lantern01
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2023-02-19 17:13:55
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Summary
Remix of testudor's WD19 dock mount, this time for the WD15. Uses the two mount holes on the back. You will need 2x M2.5x8mm screws. NOTE: DO NOT USE SCREWS LONGER THAN 10MM BECAUSE YOU WILL KILL YOUR DOCK. This is because the mount holes on these docks do not have an end stop on them, so you will drive the screw through the mainboard if it is too long.
[Update 12/02/2024] Fixed screw mounts being in conflicting directions
Modellquelle
Original-Link: Details anzeigen
CC BY