I sing at a church that keeps the lights pretty low for a part of the service. We (singers and musicians) have a hard time seeing the sheet music and words on our music stands. We tried book lights and so on but they just don't cut it very well, so i decided to make my own. it runs off 2 9v batteries wired in series with a small toggle and a 3 pod LED light. The base/cover piece doesn't work the best as the tab that clip in are weak by design unless it it printed on its side but i will work on that when i have time. Right now the base is just friction fitted in and it stays fine. Feel free to comment or make suggestions or change it as you need to. I just ask if you base off my design you just link back to mine to we can all see the evolution.