I made these simples drawers to help me organize my misc items.

The model in the pictures was printed on an Ender 3 Pro:

Nozzle: 0.6mm
Layer Height: 0.2mm
Perimeters: 2
Bottom Layers: 2
Top Layers: 3
Infill: 15% Rectilinear
Supports: OFF

The Housing is best printed on its honeycomb back, that way you won't need supports at all.

There are Two Files for the drawers, one for 0.4mm nozzle and the other is for 0.6mm nozzle.
these are the thicknesses of the walls of the drawers, I made them that way so the could print as one perimeter since there is not much pressure on them. you made print the 0.6mm filed with a 0.4mm and you will get two perimeters for extra strength.