Was getting wobble on the Z Axis, so I decided to replace the plywood parts, with this one made from ABS... It uses F608ZZ Shielded Model Flange Bearings, which sit in a recess allowing the thread rod to rotate with minimal friction... I also created an tube to house the guide rod, which can be fixed with a collet, which also reduces wobble... You may need to ream out the holes for the guide rods, so they fit just right...

This is designed for the 6mm plywood version...

Print Settings

Printer Brand:

Prusa

Printer:

**Rafts:**

Doesn't Matter

Supports:

**Resolution:**

0.2

Infill:

Notes:

Printed in ABS or PLA...

Post-Printing

Category: 3D Printer Parts