1xDrawer / 2xDrawer for Extrudr spools with labelling field.

The spools are holded by neodym magnets (d: 10mm, h: 10mm). you can rotate each attached spool seperatly.

You can attach as many spools as you want and remove or re-sort them anytime as well.

Spool dimensions:

outer diameter: ~200 mm
inner diameter: ~104.6 mm
spool hole diameter: 53 mm
spool height: 66 mm

required:

• I have used M4 x 25 mm screws but shorter screws should work too.
• Neodym magnets (d: 10mm, h: 10mm). For each spool are 2 magnets required and additionally 1 magnet for the base.