This is my take on the A1 Mini poop “issue”

Model is not really optimized for 3D printing, but I did print it as is with my mini without problems, you can see my print orientation from the picture with supports.

This is the first iteration and as you can see from the dimensions it is not fully thought through, BUT I am too lazy now to revise it. Model is not changed from what I have printed. I included STEP file so you can edit it if you like.

WARNING: if you use poop deflector from @dubios42 like I use there in the gif, the parts can collide when Z axis is at zero if the highest point of the slide is where the deflector is. Can be used together but just a heads up if you move it around. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

All the print settings were pretty much the default settings other than temps for my filament.

0.4mm Nozzle

0.2mm Layer height

2 Wall loops

15% Grid infill

Auto tree supports, 30 degree threshold angle

Around 2 hour print time

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~