Two Trees Bluer Plus when converted to Klipper the LCD screen will no longer work.

Or if you decide to change the mainboard of this printer the LCD screen will not work with non Makerbase MKS Robin boards.

This was a model to fill the hole left by removing the LCD screen.

Printed in Esun Blue PLA Pro with 0.4 nozzle, 3 walls, 3 bottoms, 4 tops, 20% gyroid infill.

**The screen being replaced is the Makerbase MKS Robin TFT43 v1.0.  I don't know if this works with other models.