Project: Disturbed Cover.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x188.06mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.3
PLA Kingroon Gray Transmission Distance: 3
PLA Kingroon Orange Transmission Distance: 4.6
PLA Kingroon Red Transmission Distance: 4.2
PLA Kingroon White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Orange
At layer #14 (1.2mm) swap to Red
At layer #18 (1.52mm) swap to White for the rest.