This is prop from nintendo game: Monster Hunter Generation
It's called Maccao Piercer and I made it for a desing challenge on Myminifactory, but i'm sharing it here so all who doesn't have a Myminifactory account can print it! As i said there is a design challenge so if you want to HELP ME and leave a like on my design here is a link :

https://www.myminifactory.com/object/28523

Thank you!

All parts are made to be printed with no support!

I put two different blade models:

- Blade full. stl is a one piece blade for bigger 3d printers- Blade 2 pieces. stl is one cutted in half to print it on smaller 3d printers

There is a part called "Internal rod", you'll need it to assemble the dagger. But if you have a rod 20x163mm (20 is a diameter of the rod in mm ) you can use that!

Assembly is very easy, just watch pictures i put here!

All was printed on my Prusa i3 MK2:

• 0.2 mm layers height
• no supports
• 5mm brim ( so i can print with no glue and be sure that first layer stick to bed )
• 10% infill
• pla fillament was used ( Icefilaments for grey, pink and black parts and BQ filament for the red one, i'm speaking about photos i put here)