Hello all,

After the mold to make its own silicone spatula (allowing to scrape the resin from the vat without damaging the FEP: https://www.thingiverse.com/thing:4115962), here is a stand that completes it! Indeed, it will allow you to empty and filter the resin from your vat directly in the bottle.

Each part (base, filter support and tank support) is mobile and is held in place with an M5 screw on the 20x20 v-slot rail.

The system is quite stable and I added a small angle of 10° to the vat support so that the resin flows well in the filter. I made sure that the support does not protrude at all from the vat so that we can come and scrape it with the silicone spatula without discomfort.