The version for the large drawer devider can be found here: LuxTools | Storage drawer devider (large) von 3D_unicorn | Kostenloses STL-Modell herunterladen | Printables.com

These simple deviders help you to split the small drawers (13.6cm x 5.4cm) of your LuxTools small part storage / cabinet into smaller compartments. Could not really find them in any store, so designed them myself with CAD. There are two version:

• A normal devider for the small drawer which is 34mm x 50mm x1.5mm
• A T-devider, to get even more compartments out of the drawer (2 versions, one with rounded inner angels and one without - whatever you prefer).

This way you can select exactly the configuration you need.

You can go for 100% infill (then you won't see the pattern) but to save filament i selected 20%.
The rounded corners belong downwards for the T-devider, as the inner angle of the drawer is also rounded - otherwise it won't fit.

Important: Sometimes my slicer asked me if the model should be converted from meter to mm. Please click “yes” in this case - couldn't figure out why. As the standard in my CAD is mm and not meter. 

This is one of my first models i designed, please let me know if it can be improved!