Hi,

a coworker of mine is a very dedicated amateur cook who's cooking for us sometimes.

I wanted to show again my appreciation for his “art”. And since he was awarded the "Golden Spoon Award" last year, this year he received the "Golden Fork Award".

The hand and the snail are not my designs. You have to get them via the provided links.
The pedestal and the fork otherwise are my designs.

printed on prusa MK4
- 0,4 mm nozzle
- layer heights: spoon = 0,15 // hand = 0,25 // bottom pedestal + screw-cap = 0,2
- infill between 5-10%

Hand: printed with a scaling of 80% and sunken into the print bed to get a flat print surface at an angle I liked (see image).
Snail: printed in two parts with 17.5 % scaling

All the parts were printed seperate and later glued together.

Filaments used:
Polymaker PolyTerra PLA grey for the pedestal
FormFutura EasyFil ePLA pearl gold for the hand, fork and text
Overture Silk Copper PLA for the pillars and snail housing
FormFutura easyFil light ivory PLA for the snail body
Some leftover dark grey PLA+ for text plate

Happy printing!