Summary

This relay is used to control the power of my soldering station, dc power supply, etc.
For connect and disconnect the device from the relay module more safety and quickly, many 2EDG sockets are used.
The relay module was bought from Xianyu. Appearance can refer to photos.
The relay module is controlled by wireless. (by a remote controller or IoT platform Thingiverse)
Program will not be provided because it still has some bugs. But you can develop a simple control program by Arduino.
All case and docking files are provided.

Materials:
[Relay]

• 1x 2x4 relay module
• 1x Arduino nand
• 1x 5v 600mA 3W AC/DC module
• 1x wireless module (CC2530 ttl wireless uart)
• 10x 2EDGRKM-5.08mm sockets
• 2x 2EDGWC-5.08mm plug with mount

Too many parts in the remote and complicated wiring involved. It is recommended that you design a new one.
[Remote]

• 1x Arduino nand
• 1x mini usb socket
• 1x wireless module (CC2530 ttl wireless uart)
• 1x 4056 battery charger
• 1x 352054 battery (from my thermal cam)
• 1x 6*8 3p battery connector
• 2x D12x1.5mm magnets
• 1x switch
• 2x m3 16mm screws
• 1x 8xsw2812 led module
• 8x micro switches
  [Remote docking]
• 4x m3 5mm screws
• 2x led
• 1x resistor
• 2x D12x1.5mm magnets
• 1x min usb