You can use any print settings as you desire, but these are the ones I used.

 

Perimeters | 3 Layer Height | 0.20mm Infill | 50% Cubic Supports | None needed! Nozzle Size | 0.40mm

Hardware I used:

Noctua 60x15mm 5V Fan

5V Power Module

8 * 6mm x 3mm

******************************************************************************

 

I’m a high school student who enjoys 3D modeling as a hobby. I primarily use Shapr3D for my creations, and I truly appreciate anyone who downloads my models, sells them, or remixes them. Feedback for future projects is always welcome. You are welcome to ask me for model requests and I will try to the best of my current abilities to fulfill your requests. You can ask me any question and I'll respond as soon as I'm available. Feel free to ask me for any alternate file types if you'd like to alter my models.

Thanks,
Xalibre (just an alias)