Artist's paint brush cleaning jar.  The lid fits any wide mouth Mason Jar. Just slide the brush into the clip and suspend it in your favorite cleaning solution.

Print Settings

• Lid:  3 perimeters, 15% Rectilinear Infill, PETG or PLA.
• Clips: 6 perimeters, 15% Rectilinear Infill, PETG
  Note: 6 perimeters and PETG required for durability.  

Parts Required

• 3 stainless steel pins, 3mm X 45mm
  • Material: 3mm x 150mm Stainless Steel Solid Round Rod available from Amazon.
  • Cut three 45mm pieces.  Remove all burrs and round one end.
• Wide Mouth Mason Jar,  pint size worked well.

Assembly

Insert the pins into the lid; the holes are 12mm deep. You may need to size the hole with a 3mm drill bit depending on printer accuracy.