Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
JoshuaHolt
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-02-24 02:21:00
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)
This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.
Apply adhesive strip
Default value assumes: Command Strip dimentions is typically 50mmx15mm
https://www.thingiverse.com/thing:3695202
Print instructions
Unassociated tags: 3d printer
Category: Electronics Summary
Adhesive Raspberry Pi Camera v2.1 mount (OpenSCAD)
Author: Brian Khuu (2019)
This is a pressfit design. No support required. Just print and push the camera PCB to the mounting holes.
Apply adhesive strip
Default value assumes: Command Strip dimentions is typically 50mmx15mm
Modellquelle
Original-Link: Details anzeigen
CC-BY