3D Printed Antenna Holder for V-Dipole (137MHz Weather Satellites)

Overview

This project is a simple and practical antenna holder designed to mount a V-Dipole antenna for receiving weather satellite signals at 137 MHz. Using a 20mm PVC pipe as the main structure, the design leverages 3D printing to create a secure and adjustable holder that’s easy to assemble and install.

Features

Compatibility: Designed for 20mm PVC pipes.

Adjustable Mounting: Includes an optional knob for easier tightening.

Simple Assembly: Minimal tools required; assembly is quick and intuitive.

Materials Needed

• 20mm PVC pipe (length as needed for your application).
• 3x M5 bolts.
• Some a weather-resistant filament(I printed mine in white PET-G).

Assembly Instructions

1. Prepare the Parts: Print all required components 
2. Insert the Nuts: Wedge the M5 nuts into the hexagonal cutouts on the holder. 
3. Attach the Pipe Holder: Insert the pipe holder into the 20mm PVC pipe. Tighten it with an M5 screw. 
4. Position the Holder: Mount the holder on the PVC pipe at your desired locations. (A minimum of 2 holders is recommended for stability.) 
5. Secure the Setup: Ensure all bolts are tightened to hold the antenna firmly in place.