Basic medical mask clip that allows the mask to be worn without irritating the ears.

I did not come up with the basic shape, just copied what has been floating around.

Improvements I made include a much thinner strap for increased flexibility and reduced weight, with profiled pins that retain their holding strength and have a more rounded feel.

Three lengths are included to help accommodate different head sizes.

Ultimaker

Ultimaker 2

No

No

0.15

100

As the thickness of the band is very thin, it is important to set up the correct settings to print it accurately. The intended thickness is 0.50 mm. To achieve this, I recommend using a 0.15 mm base resolution and a 0.20 mm initial layer thickness. This will result in the band printing in three layers which also provides plenty of strength.

Any standard material should work fine.