Summary

This is the 4 Inch Action Camera Spacecraft for LOC 4 inch style rocket tubing. This rocket is the Super DX3 from Madcow. The cameras are of this style here:

https://www.amazon.com/Dragon-Touch-Underwater-Waterproof-Accessories/dp/B07B2W96JH/ref=sr_1_4?crid=3VX8IFDINDUIW&keywords=4k+action+camera&qid=1558531743&s=electronics&sprefix=4k+ac%2Cindustrial%2C210&sr=1-4

There are many brands of this camera with similar physical dimensions.

I would recommend using this build surface as these large items just lifted right off after cooling a bit.

https://www.amazon.com/dp/B074XK8BWY

Otherwise you might need a raft or something to release these from the build surface.

The cone is printed with 0.2 resolution, 0.4 perimeter, 10% fill, 0.8 top / bottom, no support.

The base and hatch are printed with 0.2 resolution, 0.4 perimeter, 10% fill, 0.8 top / bottom, and ALL support.