A watch stand with wood elements and added weight thanks to two hidden metal plates (optional, and they can be substituted with anything that weights a bit like coins) for one watch. The upper part is tilted so the watch face can be seen well both when standing up or sitting (if you put it on a desk or bedside table).

Materials

To add weight I used two metal plates 40 mm x 90 mm x 2.5 mm but anything that fits it's good, even some coins. This is optional and it can be omitted.

The wood elements are 40 mm x 93 mm x 10 mm and 40 mm x 58 mm x 10 mm.

Printing Suggestions

By default PrusaSlicer did not want add support to the two bridges in the model, the longest is around 85 mm so I decided to play it safe and force organic supports like in the attached pictures. I printed in PLA with only two perimeters and 10% cubic infill and it feels sturdy enough.

Assembly Suggestions

Not much to say, just put the weight and the bigger wood block below, the smaller wooden block above. Maybe some glue to fix everything in place but it's not really necessary.