09.08.2018: A spool for the case is added. You can roll your ligature wires to this spool and put it into its case. It is in two parts and should be bonded with a CA or similar glue.

05.02.2018: V2 is out. Cover is fixed with two clips. Use varous sizes M2 screws and nut to fix the clips. Also an M3 screw is needed to roll the ligature around outside the case. Also the four pins must be glued into the holes on body with CA. It is highly recomended to print the clips parts with high resolution like 0.1mm and with a small nozzle like 0.2mm.

I had a ligature spool lying around and it was always de-reeling so I have designed this case for easy use.

NOTE: This case is for spools that sizes 63x16x85mm (External Dia x Internal Dia x Height).

Designed with SpaceClaim. You can add your name to the surface if you wish.