A storage block for holding all 9 T-Spacers from Mr Random's “T-Spacer Set for Book Binding | 2–10mm”.

Notes

1. Tolerances may be tight depending on your filament/printer
2. Print tester.stl if you want to test how tight the t-spacer holes will be before printing the final model (4.4mm wide)
3. .f3d and .step files included in case you wish to make adjustments

Print Settings

Filament: Polymaker PolyLite PLA - Cold White
Nozzle: 0.4mm
Layer Height: 0.2mm
Wall Loops: 2
Infill: 10% Gyroid
Support: No
Brim: No