Model updates:

• [20210305] Updated the STL. Lifted the entrence for the nippers 3 mm upwards to protect the metal printer frame from damage when inserting the nippers.

Edit:

• [20240331] Not only Onshape users but everyone can now download models in any format.

This holder is intended for the tool kit that comes with many printers.

Properties are:

• Important: The holder does not interfere with the gantry carriage in top position. (Pay attention to some others, they do!)
• The design is very compact.
• Can be used on printers with a 20x20 or 20x40 beam bridge.
• The holder does not require additional mounting material, but can be secured against sliding with a Type T Hammer Nut and an M4 screw if desired.
• Due to the downward protected placement, the sharp points of the cutting pliers do not pose a risk of injury.
  NOTE: Best squeeze the cutting pliers before hanging.
• The spatula can be hung by feel without threading, after which it is secured against unintentional sliding out.
• All sharp edges of the holder are rounded (no "Tinkercad" and "Sketchup" angularity).

Creality

CR-20

0,2

15%

Print the holder upside down to reduce the amount of support.

This part has been designed using the Onshape Free Plan.
Anyone can download models in the format of their choice, see image. Onshape users can also copy the Onshape model to their account and modify it. You can find the model here:

The tool holder in Onshape

bit.ly/3d-eboek takes you to a free Dutch course eBook of Onshape, bit.ly/3d-boek to the hard copy.
Others can learn about Onshape at learn.onshape.com.