A simple PCB vice. The distance between the jaws can be quickly and easily adjusted. The movable jaw can be loosened/tightened using the base. You will need the following items to assemble the model.

• Base x 1
• Fixed jaw x 1
• Movable jaw x 1
• Fixed jaw support x 1
• M4.5 (or M5) threaded insert x 1
• M4.5 (or M5) socket head cap screw
• Super glue
• Anti-slip carpet tape

The parts in the pictures were printed with 30% infill. However, a heavier base (100% infill) might improve the stability of the vice.