Spool holder for Creality enclosure.

It allows you to place the spool inside the enclosure during printing.

The holder is designed for standard (1-1.1kg) and small (200-250g) spools. Changing the configuration is very easy (without using tools), just pull the roller out of the guide for large spools and insert it into the guide for small spools. 

The enclosure has both horizontal and vertical holders for the PTFE tube. 

For assembly, you will additionally need three M3x12 screws and four 625zz/rs bearings - I used bearings from old V-slot wheels.

The rollers are three-piece - bolted. When twisting, keep the screw parallel to the axis of the roller.

I designed the SpoolHOLDER_STIFFENING to better stiffen the holder - I have not used it for now - the holder is stable enough for my case.

Print with PETG, PLA is not recommended.

The placement of the spool holder high up in the housing means that the filament is additionally dried with warm air during printing.

I designed the holder for another project of mine but it fits all Creality enclosure tents.

My project using Creality Enclosure S:

https://www.printables.com/model/854614-enclosure-for-artillery-sidewinder-x2x1

To ensure the parts fit correctly after the first print, I recommend my remix that helps with calibration settings in OrcaSlicer so that the prints have the designed dimensions:

https://www.printables.com/model/683647-calibration