Mount your Skadis panel onto your Festool for easy and fast access to any tools that you often need. 

Best for model painters where you will quickly grab any colour palettes from the Skadis panel, and the panels will also act like a barrier to reduce excessive air turbulence. 

Your imagination is your limit to what you can do with the Skadis on Festool. Convert it into Festool cubicle or anything, it is up to you.

Print setting

Enable support for the pegs to be printed properly

About the model

There are 3 variants, all of which the position the panel are mounted. The panel will rest on the Festool's frame to support the weight. These fasteners has about 0.20mm of tolerance added into it to accommodate printer's accuracy.

Installation

You will require at least:

• 1 x M5x18 (minimum) - This is to fasten the fastener to the frame
• 1 x M5x12 (minimum) - This is to fasten the panel to the fastener
• 1 x M5 washer - To fasten the panel to the fastener
• 2 x M5 nuts

It is optional for you to put on the M5 x 18 bolt for quick slide release of the panel should you require of using the Festool for something larger. The presence of this bolt is to have the bolt bite into the Festool's rail to fix the fastener.