This mount places the filament sensor at the center so that it can be used with either of the two spools.
It was designed to be compatible with the LED panel of the Elegoo Neptune 3 Pro.

You will need three M3 screws:

• [1×] M3×9 mm
• [2×] M3×16 mm*

*) The screws should go all the way in and sit tightly while leaving the sensor mount space to move around them. This is necessary to compensate for quick upward movements, e.g., when the filament is retracted or when the print head moves up after printing has finished.

If you like this design, please consider leaving a ♥heart. Thanks!