Carson Specter Steering Servo Mount
Marcus Rivera
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2019-05-19 22:56:36
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Summary
The original Carson Specter 4S/6S steering servo mount tends to flex because it is fastened by 2 screws into long nylon stand offs only.
This is my design for a stable servo mount. It is also fastened by two M3 screws trough the original holes and self securing M3 nuts. I also recommend to add double-sided adhesive foam tape between te mount and the bottom plate. Have fun and precise steering.
08/11/2019 added a version for the Specter 4S, where the chassis plate is shorter. The mount has got a cylindrical recess in order not to collide with the battery compartment.
Print Settings
Printer:
Tronxy X5S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30% Quarter Cubic
Notes:
Use 3 wall perimeters and 30% Quarter Cubic infill. Use PET-G or ABS filament.
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY