Spoke magnet holder small
BreezyChisel
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-01-04 19:40:17
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Spoke magnet holder for 8x3mm round magnet.
M3 screws 5 to 10mm should fit.
Print Settings
Printer:
I3 Mega
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1
Infill:
10
Notes:
Printed at 108% in Cura worked best.
you should use a brim.
Post-Printing
install on spoke
hotglue the magnet in.
heat the spoke up a little with a lighter then tighten the screws.
Tapping the hole may be necessary.
Modellquelle
Original-Link: Details anzeigen
CC-BY-SA