This is a Prusa Protective Face Shield - RC3 inspired version, modified to be printed in just 25 minutes with a .6mm or .8mm nozzle. We use polyester elastic #11 and #14 (for milimeters).

1. "Face Shield_Botlab(3DPrinting)" is for 3D printing (20 minutes)
2. Face Shield_Botlab(moldinjecting) is for mold injection (1 per minute)

For both models, you should use de laser cut pattern (DXF file) on the shield, using APET or PETG.

Print instructions

For "Face Shield_Botlab(3DPrinting)"

Nozzle size: 0.6-0.8mm
Infill: 0%
Top solid layers: 0
Bottom solid layers: 0
Perimeter shield: 3
Speed: 50-70mm/s