This is a pair of clips to hold the lance more securely on my Efco pressure washer.

They glue on, the short flat clip at the bottom and the angled one near the handle.
The taller clip is at an angle of 22.5 degrees to the flat one if you need to make changes.

They are made to hold a lance of 25-30mm diameter.

Print it with the clip profile flat on the bed so that there is no weakness in the clip from the layers

Creality

CR-10 Mini

No

No

0.2mm

15%

I made this with a high enough wall count to make the clips solid while the main body was not, this may not be necessary.