Retro Artist

A fun way to chill and create works of art using a 16 x 16 square grid.

Designed to be mounted on the wall via screws or 3M double sided tape or used flat on a desk, just rearrange the individual squares to create that 8 bit retro masterpiece.

Each tile is 10mm square and the attachment hole is 5mm square. The tile I found fitted best, that was still easy to remove and replace has a tolerance of 0.1mm, but I have included a few options so you can print the one that works best from your printer.

I have included a pair of tweezers designed to get at the squares you cant get your fingers at. They work ok as long as the fit isn't too tight on the tile.

The board is 230mm x 200mm.