Table Fan
print_hobby
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-01-14 00:52:42
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Print the box and back cover - PLA 0.15 mm. Put the fan in the box tightly. Connect the female connector to the back cover and solder the wires. Screw the back cover with 3 screws 3 mm.I glued non-slip pads to the bottom of the box.
Tags
Modellquelle
Original-Link: Details anzeigen
CC0