Bear Emoji inspired from the iOS 13.3 version.
Require two same prints, glued togheter after post-elaboration, read instructions!
This emoji can be found here: https://emojipedia.org/bear/
And on Telegram Emoji List right now, in 2020.

This was designed to be printed in two separate parts, to have one bear face on every side: in fact, ears fill could be too thin to be printed one-side only. If you want, feel free to remix and make it one-sideable.

After painting and post-elaborating both parts, I glued them toghether.

And I would not trust the hook, if you have a low-end printer: it's very weak!

I printed in PLA, 3-4 walls, 0.16mm layer.
For better result slow down the print speed after reaching the details level (like eyes or mouth).

This thing isn't perfect. I upload it here AS IS, because I have no time to fix it, but I found no decent 3D printable Bear Emoji.

If someone wants to make it better, here is the list of things that should be fixed:

• mirror left part of the bear better, since mirroring isn't perfect (if opened with blender, you can see the "midline" I used to join two parts). So be carefull: this isn't perfect left-right mirrored bear face!
• do the details more rounded: only EYES are in some way rounded. It would be great to have all the mouth and all the glued-togheter parts more rounded.
• fix dimensions of details: some details are extruded on 0.1-0.2mm so they are barely visible as "different" for human eye. I didn't want to make it huge, but I make it too small.
• hook should be stronger and bigger. You can also make a "punch-hole" version.

If you want to do a remix-fix, you can then mark it as "remixed" if you PM me, I will add the link to your version here, to make you print a better version.