Garmin bike computer mount for several Canyon bikes. Replaces a spacer below the stemcap. Tested and designed for a Canyon Neuron:ONfly but also compatible with other Canyon models according to their website.

Compatibility chart: https://www.canyon.com/en-lu/gear/bike-parts/spare-and-wear-parts/spare-wear-parts/canyon-gp7042-01-spacer-kit/10007491.html

FYI: I removed the two centering pins on the bottom as they would snap way too easily and the preload holds the mount in place perfectly.

Required Hardware:

• 2x M3 threaded inserts
• 2x M3x8 countersunk screws

Mounting steps:

Step 1: Insert both threaded inserts in the mount

Step 2: Push the cover into the mount aligning the holes on both parts

Step 3: Insert the baseplate into the assembly and screw it together

Step 4: Unscrew stemcap

Step 5: Remove top spacer and replace it with the Garmin mount

Step 6: Align the mount to the spacer and stem, then screw the stemcap back on.

Print:

• Mount

Printed out of eSun ePETG_HS

0.2mm Layer height

30% Infill

4 Perimeters

3 Top/bottom layers

• Baseplate

Printed out of eSun ePLA+

0.2mm Layer height

15% Infill

3 Perimeters

5 Top/bottom layers

• Cover

Printed out of eSun ePLA+

0.2mm Layer height

15% Infill

3 Perimeters

5 Top/bottom layers